Power Base Module — Charger Certification¶
The Power Base Module is the lower housing of the EverTag Station: a self-contained, custom pass-through outlet product with an integrated USB Class 2 power supply, supplied complete (enclosure + electronics) by the power-module supplier.
It is certified independently of the Connectivity Module. There are two separate supplier projects (different plug, mains voltage, safety scheme, efficiency regime, and mark): the US 232507 fixed pass-through wall-mount, and the EU / Worldwide universal charger with interchangeable plug heads. Each project has its own self-contained spec below, including its labeling section and supplier-alignment table.
The EU / Worldwide spec is at the RFQ stage — it is supplier-agnostic and serves as an initial specification and request-for-quotation basis (the current supplier and/or alternative suppliers may quote).
Listee vs Manufacturer
CargoBeacon AB is the certification Listee / product owner (the entity on the mark). The power-module supplier is the manufacturer of record (factory in the lab file). These docs are shared with the supplier for review — the aim is alignment on the key aspects, not sign-off on every detail.
Projects¶
| Variant | Article | Plug / mains | Safety + efficiency | Mark | Stage | Spec |
|---|---|---|---|---|---|---|
| US wall-mount | 232507 | Fixed NEMA 5-15 duplex pass-through, 120 V / 60 Hz | UL 498 + UL 1310, DoE Level VI | ETL Listed | Spec — supplier engaged | US Charger (232507) |
| EU / Worldwide (future) | TBD (2325xx) | Interchangeable head (US-A / EU-C / UK-G / AU-I), universal 100–240 V | EN/IEC 62368-1, CE/UKCA/RCM…, Ecodesign | CE / UKCA + regional | RFQ — supplier-agnostic | EU / Worldwide Charger |
Shared references¶
- Modular Integration Strategy — module pre-cert rules (Connectivity Module).
- Lab Test Plan & Preparation — formal test matrix.
- Supplier Deliverables → Power Base Module — 3D models, supplier contact.
- 232506 Enclosure Design — shared enclosure / material.